| Assessment Year | 1988 |
|---|---|
| Principal Product | MOLDED POLYSTRENE PRODUCTS |
| NAICS |
n/a
|
| SIC | 3086: Plastics Foam Products |
| Sales Range | $500 k to 1M |
| # of Employees | 8 |
| Plant Area |
n/a
|
| Annual Production | 378,000
lb
|
| Production Hrs. Annual | 2,000
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $32,841 | 344,959 |
kWh
|
$0.095 |
| Natural Gas | $15,326 | 4,096 |
MMBtu
|
$3.74 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $4,179 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7111: Reduce illumination to minimum necessary levels | $600 | - |
$600
6,448
kWh
|
- | - | |
| 02 | 2.4221: Install compressor air intakes in coolest locations | $373 | $2,000 |
$373
3,810
kWh
|
- | - | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $36 | $25 |
$36
293
kWh
|
- | - | |
| 04 | 2.2437: Recover waste heat from equipment | $920 | $540 | - |
$920
-
MMBtu
|
- | |
| 05 | 2.2441: Preheat boiler makeup water with waste process heat | $1,560 | $4,190 | - |
$1,560
-
MMBtu
|
- | |
| 06 | 2.2692: Use outside cold water source as a supply of cooling water | $690 | $300 |
$990
10,258
kWh
|
- | $(-300.0) | |
| TOTAL RECOMMENDED | $4,179 | $7,055 |
$1,999
20,809
kWh
|
$2,480
-
MMBtu
|
$(-300.0) | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs