| Assessment Year | 1985 |
|---|---|
| Principal Product | ROUGH LUMBER |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $5 M to 10M |
| # of Employees | 80 |
| Plant Area |
n/a
|
| Annual Production | 17,000
thousand feet
|
| Production Hrs. Annual | 4,000
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $138,850 | 2,461,020 |
kWh
|
$0.056 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $13,804 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $12,713 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $613 | $562 |
$613
10,844
kWh
|
|
| 02 | 2.6232: Install set-back timers | $1,091 | - |
$1,091
19,343
kWh
|
|
| 03 | 2.6212: Turn off equipment during breaks, reduce operating time | $6,199 | - |
$6,199
109,906
kWh
|
|
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $5,042 | $150 |
$5,042
89,390
kWh
|
|
| 05 | 2.2424: Use heat in flue gases to preheat products or materials | $859 | $1,000 |
$859
33,411
kWh
|
|
| TOTAL RECOMMENDED | $13,804 | $1,712 |
$13,804
262,894
kWh
|
||
| TOTAL IMPLEMENTED | $12,713 | $1,712 |
$12,713
243,551
kWh
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs