| Assessment Year | 1985 |
|---|---|
| Principal Product | MOLDED RUBBER PRODUCTS |
| NAICS |
n/a
|
| SIC | 3069: Fabricated Rubber Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 90 |
| Plant Area |
n/a
|
| Annual Production | 52,420,000
pieces
|
| Production Hrs. Annual | 7,488
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $53,088 | 1,242,966 |
kWh
|
$0.043 |
| Natural Gas | $4,373 | 725 |
MMBtu
|
$6.03 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $9,363 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $9,363 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $360 | $363 |
$360
8,206
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $170 | $93 |
$170
4,103
kWh
|
- | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $453 | $400 |
$453
10,551
kWh
|
- | |
| 04 | 2.1233: Analyze flue gas for proper air/fuel ratio | $180 | $250 | - |
$180
-
MMBtu
|
|
| 05 | 2.2212: Use minimum safe oven ventilation | $780 | - |
$780
18,171
kWh
|
- | |
| 06 | 2.3191: Use demand controller or load shedder | $7,420 | $5,000 |
$7,420
-
kWh
|
- | |
| TOTAL RECOMMENDED | $9,363 | $6,106 |
$9,183
41,031
kWh
|
$180
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $9,363 | $6,106 |
$9,183
41,031
kWh
|
$180
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs