| Assessment Year | 2017 |
|---|---|
| Principal Product | Bellows |
| NAICS | 333999: All Other Miscellaneous General Purpose Machinery Manufacturing |
| SIC | 3599: Industrial and Commercial Machinery and Equipment, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 104 |
| Plant Area |
35,000
ft2
|
| Annual Production | 250
units
|
| Production Hrs. Annual | 7,344
hrs
|
| Location (State) | Tennessee |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $97,296 | 1,512,880 |
kWh
|
$0.064 | |
| Electricity Demand | $43,564 | 3,885 |
kW-mo/yr
|
$11.21 | |
| Natural Gas | $1,510 | 182 |
MMBtu
|
$8.30 | |
| Waste Disposal Costs | |||||
| Water Usage | $1,072 | 333,000 |
Tgal
|
$0.003 | |
| Water Disposal | $1,568 | 333 |
Tgal
|
$4.71 | |
| TOTAL YEARLY COSTS | $145,010 | ||||
| RECOMMENDED SAVINGS* | $71,808 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | $31,640 | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | One-time Revenue or Avoided Cost Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.9114: Use solar heat to make electricty | $19,976 | $72,881 |
$19,976
271,981
kWh
|
- | - | - | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $11,919 | $17,290 |
$9,320
144,947
kWh
|
$2,599
-
kW-mo/yr
|
- | - | |
| 03 | 4.812: Apply for investment incentives | $31,640 | $150 | - | - | $7,910 | $23,730 | |
| 04 | 2.3212: Optimize plant power factor | $6,006 | $10,000 | - |
$6,006
-
kW-mo/yr
|
- | - | |
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,267 | $3,050 |
$2,267
35,251
kWh
|
- | - | - | |
| TOTAL RECOMMENDED | $71,808 | $103,371 |
$31,563
452,179
kWh
|
$8,605
-
kW-mo/yr
|
$7,910 | $23,730 | ||
| TOTAL IMPLEMENTED | $31,640 | $150 | - | - | $7,910 | $23,730 | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs