Assessment Year | 2012 |
---|---|
Principal Product | Finished lumber and roof trusses |
NAICS | 321214: Truss Manufacturing |
SIC | 2439: Structural Wood Members, Not Elsewhere Classified |
Sales Range | $50 M to 100M |
# of Employees | 83 |
Plant Area |
55,000
ft2
|
Annual Production | 25,000
thousand feet
|
Production Hrs. Annual | 2,080
hrs
|
Location (State) | Colorado |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $35,109 | 833,589 |
kWh
|
$0.042 |
Electricity Demand | $89,608 | 4,409 |
kW-mo/yr
|
$20.32 |
Electricity Fees | $533 | - |
|
- |
Natural Gas | $38,282 | 5,097 |
MMBtu
|
$7.51 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $30,430 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $3,300 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | Personnel Changes Savings | Administrative Changes Savings | Ancillary Material Cost Savings |
---|---|---|---|---|---|---|---|---|---|---|
01 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $24,210 | $77,390 |
$7,870
196,700
kWh
|
$16,340
-
kW-mo/yr
|
- | - | - | - | |
02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,840 | $350 |
$980
24,500
kWh
|
$1,860
-
kW-mo/yr
|
- | - | - | - | |
03 | 2.7261: Install timers and/or thermostats | $460 | - | - | - |
$460
-
MMBtu
|
- | - | - | |
04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $460 | $510 |
$400
10,000
kWh
|
- | - | $30 | - | $30 | |
05 | 2.9114: Use solar heat to make electricty | $2,460 | $35,000 |
$560
14,100
kWh
|
$630
-
kW-mo/yr
|
- | - | $1,270 | - | |
TOTAL RECOMMENDED | $30,430 | $113,250 |
$9,810
245,300
kWh
|
$18,830
-
kW-mo/yr
|
$460
-
MMBtu
|
$30 | $1,270 | $30 | ||
TOTAL IMPLEMENTED | $3,300 | $350 |
$980
24,500
kWh
|
$1,860
-
kW-mo/yr
|
$460
-
MMBtu
|
- | - | - |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs