| Assessment Year | 1987 |
|---|---|
| Principal Product | BONELESS BEEF PRODUCTS |
| NAICS |
n/a
|
| SIC | 2011: Meat Packing Plants |
| Sales Range | $50 M to 100M |
| # of Employees | 180 |
| Plant Area |
n/a
|
| Annual Production | 85,000
pieces
|
| Production Hrs. Annual | 4,550
hrs
|
| Location (State) | Nebraska |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $229,184 | 5,569,754 |
kWh
|
$0.041 |
| Natural Gas | $355,344 | 77,310 |
MMBtu
|
$4.60 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $116,712 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $110,162 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2449: Recover heat from exhausted steam, hot air or hot water | $84,858 | $27,000 | - |
$84,858
-
MMBtu
|
|
| 02 | 2.2121: Increase amount of condensate returned | $19,460 | $1,000 | - |
$19,460
-
MMBtu
|
|
| 03 | 2.2491: Use cooling air which cools hot work pieces for space heating | $3,467 | $500 | - |
$3,467
-
MMBtu
|
|
| 04 | 2.2136: Install / repair insulation on steam lines | $573 | $500 | - |
$573
-
MMBtu
|
|
| 05 | 2.2511: Insulate bare equipment | $2,502 | $950 | - |
$2,502
-
MMBtu
|
|
| 06 | 2.2135: Repair and eliminate steam leaks | $4,535 | $250 | - |
$4,535
-
MMBtu
|
|
| 07 | 2.2111: Install steam trap | $483 | $220 | - |
$483
-
MMBtu
|
|
| 08 | 2.4221: Install compressor air intakes in coolest locations | $253 | $300 |
$253
6,155
kWh
|
- | |
| 09 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $581 | - |
$581
14,068
kWh
|
- | |
| TOTAL RECOMMENDED | $116,712 | $30,720 |
$834
20,223
kWh
|
$115,878
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $110,162 | $29,270 |
$253
6,155
kWh
|
$109,909
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs