| Assessment Year | 2011 |
|---|---|
| Principal Product | Printed paper products |
| NAICS | 323111: Commercial Printing (except Screen and Books) |
| SIC | 2752: Commercial Printing, Lithographic |
| Sales Range | $10 M to 50M |
| # of Employees | 115 |
| Plant Area |
75,848
ft2
|
| Annual Production | 350,357,004
pieces
|
| Production Hrs. Annual | 8,112
hrs
|
| Location (State) | Illinois |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $237,850 | 3,925,380 |
kWh
|
$0.061 |
| Electricity Demand | $51,164 | 9,593 |
kW-mo/yr
|
$5.33 |
| Electricity Fees | $33,412 | - |
|
- |
| Natural Gas | $26,959 | 2,929 |
MMBtu
|
$9.20 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $56,646 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.2443: Re-use or recycle hot or cold process exhaust air | $22,085 | $7,000 | - | - |
$22,085
-
MMBtu
|
|
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $21,355 | $7,633 |
$18,986
309,700
kWh
|
$2,369
-
kW-mo/yr
|
- | |
| 03 | 2.7231: Use radiant heater for spot heating | $8,456 | $4,240 | - | - |
$8,456
-
MMBtu
|
|
| 04 | 2.4133: Use most efficient type of electric motors | $2,708 | $1,620 |
$2,428
40,062
kWh
|
$280
-
kW-mo/yr
|
- | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $1,087 | $1,500 |
$966
15,942
kWh
|
$121
-
kW-mo/yr
|
- | |
| 06 | 2.7135: Install occupancy sensors | $955 | $975 |
$832
13,733
kWh
|
$123
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $56,646 | $22,968 |
$23,212
379,437
kWh
|
$2,893
-
kW-mo/yr
|
$30,541
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs