| Assessment Year | 1987 |
|---|---|
| Principal Product | FURNITURE - WOOD & METAL |
| NAICS |
n/a
|
| SIC | 2511: Wood Household Furniture, Except Upholstered |
| Sales Range | $10 M to 50M |
| # of Employees | 687 |
| Plant Area |
n/a
|
| Annual Production | 1,400,000
pieces
|
| Production Hrs. Annual | 2,000
hrs
|
| Location (State) | North Carolina |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $374,250 | 6,478,605 |
kWh
|
$0.058 |
| LPG | $101,983 | 15,642 |
MMBtu
|
$6.52 |
| Fuel Oil #2 | $1,628 | 395 |
MMBtu
|
$4.12 |
| Wood | $12,800 | 24,080 |
MMBtu
|
$0.53 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $14,026 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Wood Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,202 | $1,707 |
$4,202
72,685
kWh
|
- | - | |
| 02 | 2.4133: Use most efficient type of electric motors | $911 | $1,615 |
$911
15,826
kWh
|
- | - | |
| 03 | 2.2443: Re-use or recycle hot or cold process exhaust air | $5,794 | - | - |
$10,794
-
MMBtu
|
$(-5,000.0) | |
| 04 | 2.2511: Insulate bare equipment | $72 | $200 | - |
$72
-
MMBtu
|
- | |
| 05 | 2.4312: Improve lubrication practices | $1,036 | - |
$1,036
18,171
kWh
|
- | - | |
| 06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,437 | - |
$1,437
24,912
kWh
|
- | - | |
| 07 | 2.4221: Install compressor air intakes in coolest locations | $574 | $600 |
$574
9,965
kWh
|
- | - | |
| TOTAL RECOMMENDED | $14,026 | $4,122 |
$8,160
141,559
kWh
|
$10,866
-
MMBtu
|
$(-5,000.0) | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Wood Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs