| Assessment Year | 1987 |
|---|---|
| Principal Product | MOLDED PLASTIC PRODUCTS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 170 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,600
hrs
|
| Location (State) | North Carolina |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $535,957 | 9,163,247 |
kWh
|
$0.058 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $60,507 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $12,754 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2614: Use cooling tower or economizer to replace chiller cooling | $10,589 | $3,000 |
$10,589
181,125
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $12,448 | $10,000 |
$12,448
212,778
kWh
|
- | |
| 03 | 2.5194: Redesign process | $2,779 | $6,000 |
$2,779
47,479
kWh
|
- | |
| 04 | 2.7226: Use computer programs to optimize hvac performance | $26,038 | $4,000 |
$26,038
445,193
kWh
|
- | |
| 05 | 2.4312: Improve lubrication practices | $4,191 | - |
$11,811
201,934
kWh
|
$(-7,620.0) | |
| 06 | 2.4133: Use most efficient type of electric motors | $2,960 | $1,685 |
$2,960
50,703
kWh
|
- | |
| 07 | 2.7228: Avoid introducing hot, humid, or dirty air into hvac system | $1,196 | $1,800 |
$1,196
20,516
kWh
|
- | |
| 08 | 2.4221: Install compressor air intakes in coolest locations | $306 | $500 |
$306
5,275
kWh
|
- | |
| TOTAL RECOMMENDED | $60,507 | $26,985 |
$68,127
1,165,003
kWh
|
$(-7,620.0) | ||
| TOTAL IMPLEMENTED | $12,754 | $10,500 |
$12,754
218,053
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs