| Assessment Year | 2017 |
|---|---|
| Principal Product | Injection molded plastics |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 60 |
| Plant Area |
45,000
ft2
|
| Annual Production | 200,000
units
|
| Production Hrs. Annual | 6,800
hrs
|
| Location (State) | Arizona |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $125,676 | 1,595,760 |
kWh
|
$0.079 | |
| Electricity Demand | $18,409 | 3,604 |
kW-mo/yr
|
$5.11 | |
| Electricity Fees | $483 | - |
|
- | |
| Waste Disposal Costs | |||||
| Water Usage | $3,501 | 1,105 |
Tgal
|
$3.17 | |
| Water Disposal | $3,584 | 983 |
Tgal
|
$3.65 | |
| Solid Waste (non-haz) | $5,775 | 96,120 |
lb
|
$0.060 | |
| TOTAL YEARLY COSTS | $157,428 | ||||
| RECOMMENDED SAVINGS* | $22,560 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | - | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $11,622 | $15,120 |
$10,529
133,692
kWh
|
$1,093
-
kW-mo/yr
|
|
| 02 | 2.4221: Install compressor air intakes in coolest locations | $315 | $500 |
$289
3,673
kWh
|
$26
-
kW-mo/yr
|
|
| 03 | 2.5124: Use gravity feeds wherever possible | $8,594 | $13,600 |
$7,712
97,920
kWh
|
$882
-
kW-mo/yr
|
|
| 04 | 2.5123: Reduce fluid flow rates | $892 | $920 |
$840
10,666
kWh
|
$52
-
kW-mo/yr
|
|
| 05 | 2.6218: Turn off equipment when not in use | $1,136 | $100 |
$1,114
14,139
kWh
|
$22
-
kW-mo/yr
|
|
| TOTAL RECOMMENDED | $22,560 | $30,240 |
$20,484
260,090
kWh
|
$2,076
-
kW-mo/yr
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs