| Assessment Year | 1996 |
|---|---|
| Principal Product | Custom Plastic Injection Molding |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 60 |
| Plant Area |
45,000
ft2
|
| Annual Production | 2,000,000
pieces
|
| Production Hrs. Annual | 6,883
hrs
|
| Location (State) | Arkansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $77,425 | 1,041,911 |
kWh
|
$0.074 |
| Electricity Demand | $11,216 | 2,870 |
kW-mo/yr
|
$3.91 |
| Natural Gas | $1,355 | 236 |
MMBtu
|
$5.74 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $22,074 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $21,952 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7111: Reduce illumination to minimum necessary levels | $8,787 | $1,670 |
$8,046
108,734
kWh
|
$741
-
kW-mo/yr
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $508 | $130 |
$439
5,862
kWh
|
$69
-
kW-mo/yr
|
- | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $94 | $80 |
$81
1,172
kWh
|
$13
-
kW-mo/yr
|
- | |
| 04 | 2.4133: Use most efficient type of electric motors | $7,710 | $6,520 |
$7,057
95,252
kWh
|
$653
-
kW-mo/yr
|
- | |
| 05 | 2.2511: Insulate bare equipment | $3,093 | $569 | - |
$3,093
-
kW-mo/yr
|
- | |
| 06 | 2.3136: Overlap custodial services with normal day hours | $122 | - |
$122
1,758
kWh
|
- | - | |
| 07 | 3.5315: Lease / purchase baler; sell cardboard to recycler | $1,760 | $5,000 | - | - |
$1,760
-
lb
|
|
| TOTAL RECOMMENDED | $22,074 | $13,969 |
$15,745
212,778
kWh
|
$4,569
-
kW-mo/yr
|
$1,760
-
lb
|
||
| TOTAL IMPLEMENTED | $21,952 | $13,969 |
$15,623
211,020
kWh
|
$4,569
-
kW-mo/yr
|
$1,760
-
lb
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Solid Waste (non-haz) Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs