| Assessment Year | 1994 |
|---|---|
| Principal Product | Poulty Feed |
| NAICS |
n/a
|
| SIC | 2048: Prepared Feed and Feed Ingredients for Animals and Fowls, Except Dogs and Cats |
| Sales Range | $10 M to 50M |
| # of Employees | 38 |
| Plant Area |
44,600
ft2
|
| Annual Production | 220,000
ton
|
| Production Hrs. Annual | 6,257
hrs
|
| Location (State) | Arkansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $245,792 | 4,827,374 |
kWh
|
$0.051 |
| Natural Gas | $118,295 | 39,665 |
MMBtu
|
$2.98 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $20,372 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $20,372 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.1233: Analyze flue gas for proper air/fuel ratio | $5,314 | $1,000 | - |
$5,314
-
MMBtu
|
|
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,243 | $150 |
$2,243
43,962
kWh
|
- | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $191 | $100 |
$191
3,810
kWh
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $986 | $484 |
$986
19,343
kWh
|
- | |
| 05 | 2.7111: Reduce illumination to minimum necessary levels | $730 | $240 |
$730
14,361
kWh
|
- | |
| 06 | 2.4133: Use most efficient type of electric motors | $3,143 | $4,170 |
$3,143
61,841
kWh
|
- | |
| 07 | 2.2135: Repair and eliminate steam leaks | $7,010 | $1,000 | - |
$7,010
-
MMBtu
|
|
| 08 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $755 | $575 |
$755
14,947
kWh
|
- | |
| TOTAL RECOMMENDED | $20,372 | $7,719 |
$8,048
158,264
kWh
|
$12,324
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $20,372 | $7,719 |
$8,048
158,264
kWh
|
$12,324
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs