| Assessment Year | 1993 |
|---|---|
| Principal Product | welded wire fabric mesh |
| NAICS |
n/a
|
| SIC | 3315: Steel Wiredrawing and Steel Nails and Spikes |
| Sales Range | $10 M to 50M |
| # of Employees | 300 |
| Plant Area |
n/a
|
| Annual Production | 54,000
ton
|
| Production Hrs. Annual | 8,544
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $315,135 | 3,846,718 |
kWh
|
$0.082 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $12,100 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $10,680 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.3212: Optimize plant power factor | $7,090 | $16,000 |
$7,090
-
kWh
|
|
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,300 | $1,000 |
$2,300
43,962
kWh
|
|
| 03 | 2.7261: Install timers and/or thermostats | $940 | $300 |
$940
17,878
kWh
|
|
| 04 | 2.7124: Make a practice of turning off lights when not needed | $650 | - |
$650
12,309
kWh
|
|
| 05 | 2.7124: Make a practice of turning off lights when not needed | $640 | $765 |
$640
8,206
kWh
|
|
| 06 | 2.4133: Use most efficient type of electric motors | $230 | $540 |
$230
2,931
kWh
|
|
| 07 | 2.4314: Use synthetic lubricant | $250 | - |
$250
2,931
kWh
|
|
| TOTAL RECOMMENDED | $12,100 | $18,605 |
$12,100
88,217
kWh
|
||
| TOTAL IMPLEMENTED | $10,680 | $17,765 |
$10,680
64,477
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs