| Assessment Year | 1991 |
|---|---|
| Principal Product | HARDWOOD LUMBER |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 34 |
| Plant Area |
n/a
|
| Annual Production | 10,000
thousand feet
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $100,991 | 2,068,288 |
kWh
|
$0.049 |
| Wood | $55,579 | 90,200 |
MMBtu
|
$0.62 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $5,274 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $4,771 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Wood Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $1,156 | $748 |
$1,156
31,360
kWh
|
- | - | |
| 02 | 2.7221: Lower temperature during the winter season and vice-versa | $1,500 | - |
$1,500
14,654
kWh
|
- | - | |
| 03 | 2.4312: Improve lubrication practices | $1,350 | - |
$1,350
37,808
kWh
|
- | - | |
| 04 | 2.1233: Analyze flue gas for proper air/fuel ratio | $540 | $1,270 | - |
$540
-
MMBtu
|
- | |
| 05 | 2.8114: Change rate schedules or other changes in utility service | $503 | - | - | - | $503 | |
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $55 | $14 |
$55
586
kWh
|
- | - | |
| 07 | 2.6232: Install set-back timers | $170 | - |
$170
5,569
kWh
|
- | - | |
| TOTAL RECOMMENDED | $5,274 | $2,032 |
$4,231
89,977
kWh
|
$540
-
MMBtu
|
$503 | ||
| TOTAL IMPLEMENTED | $4,771 | $2,032 |
$4,231
89,977
kWh
|
$540
-
MMBtu
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Wood Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs