| Assessment Year | 1989 |
|---|---|
| Principal Product | PNEUMATIC HAND TOOLS |
| NAICS |
n/a
|
| SIC | 3546: Power-Driven Handtools |
| Sales Range | $10 M to 50M |
| # of Employees | 290 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 8,400
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $361,428 | 8,204,865 |
kWh
|
$0.044 |
| Natural Gas | $130,139 | 28,212 |
MMBtu
|
$4.61 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $23,715 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $23,470 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4322: Use or replace with energy efficient substitutes | $11,470 | $50,000 |
$11,470
246,190
kWh
|
- | |
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $6,325 | $1,000 |
$6,325
230,363
kWh
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,730 | $6,030 |
$2,730
65,358
kWh
|
- | |
| 04 | 2.7123: Keep lamps and reflectors clean | $1,855 | $6,900 |
$1,855
26,377
kWh
|
- | |
| 05 | 2.2515: Use optimum thickness insulation | $870 | $145 | - |
$870
-
MMBtu
|
|
| 06 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $245 | $1,000 |
$245
8,792
kWh
|
- | |
| 07 | 2.6232: Install set-back timers | $220 | - |
$220
8,206
kWh
|
- | |
| TOTAL RECOMMENDED | $23,715 | $65,075 |
$22,845
585,286
kWh
|
$870
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $23,470 | $64,075 |
$22,600
576,494
kWh
|
$870
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs