| Assessment Year | 1989 |
|---|---|
| Principal Product | HEAT TREATED METAL PARTS |
| NAICS |
n/a
|
| SIC | 3398: Metal Heat Treating |
| Sales Range | $1 M to 5M |
| # of Employees | 22 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 2,008
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $24,806 | 343,787 |
kWh
|
$0.072 |
| Natural Gas | $9,169 | 2,134 |
MMBtu
|
$4.30 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $3,880 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,688 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2414: Use waste heat from hot flue gases to preheat | $1,987 | $6,125 |
$(-391.0)
(-4,103)
kWh
|
$2,378
-
MMBtu
|
|
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,275 | $5,730 |
$1,275
16,999
kWh
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $48 | $11 |
$48
586
kWh
|
- | |
| 04 | 2.6232: Install set-back timers | $250 | $50 |
$250
5,275
kWh
|
- | |
| 05 | 2.6232: Install set-back timers | $205 | - |
$205
4,396
kWh
|
- | |
| 06 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $115 | $300 |
$115
2,638
kWh
|
- | |
| TOTAL RECOMMENDED | $3,880 | $12,216 |
$1,502
25,791
kWh
|
$2,378
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $1,688 | $6,091 |
$1,688
25,498
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs