Assessment Year | 2018 |
---|---|
Principal Product | Aircraft parts and assemblies |
NAICS | 336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing |
SIC | 3728: Aircraft Parts and Auxiliary Equipment, Not Elsewhere Classified |
Sales Range | $5 M to 10M |
# of Employees | 300 |
Plant Area |
130,000
ft2
|
Annual Production | 750
units
|
Production Hrs. Annual | 3,840
hrs
|
Location (State) | Utah |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | ||
---|---|---|---|---|---|
Electricity Usage | $42,534 | 1,152,651 |
kWh
|
$0.037 | |
Electricity Demand | $74,999 | 4,363 |
kW-mo/yr
|
$17.19 | |
Waste Disposal Costs | |||||
Solid Waste (non-haz) | $6,175 | 10,863 |
lb
|
$0.57 | |
TOTAL YEARLY COSTS | $123,708 | ||||
RECOMMENDED SAVINGS* | $37,405 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
IMPLEMENTED SAVINGS* | $37,405 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Solid Waste (non-haz) Savings | Personnel Changes Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|---|---|---|
01 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $13,622 | - | - |
$13,622
-
kW-mo/yr
|
- | - | - | - | |
02 | 2.5195: Change product design to reduce energy requirements | $9,283 | $120 | - |
$9,283
-
kW-mo/yr
|
- | - | - | - | |
03 | 2.8121: Apply for tax-free status for energy purchases | $7,783 | $500 | - | - | $7,783 | - | - | - | |
04 | 3.5241: Sell used plates to an aluminum recycler | $5,775 | - | - | - | - |
$6,175
-
lb
|
- | $(-400.0) | |
05 | 2.6125: Keep equipment clean | $942 | $80 |
$274
7,200
kWh
|
$1,196
-
kW-mo/yr
|
- | - | $(-528.0) | - | |
TOTAL RECOMMENDED | $37,405 | $700 |
$274
7,200
kWh
|
$24,101
-
kW-mo/yr
|
$7,783 |
$6,175
-
lb
|
$(-528.0) | $(-400.0) | ||
TOTAL IMPLEMENTED | $37,405 | $700 |
$274
7,200
kWh
|
$24,101
-
kW-mo/yr
|
$7,783 |
$6,175
-
lb
|
$(-528.0) | $(-400.0) |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs