| Assessment Year | 1995 |
|---|---|
| Principal Product | Automotive wheels |
| NAICS |
n/a
|
| SIC | 3465: Automotive Stampings |
| Sales Range | $10 M to 50M |
| # of Employees | 150 |
| Plant Area |
562,496
ft2
|
| Annual Production | 3,500,000
pieces
|
| Production Hrs. Annual | 5,720
hrs
|
| Location (State) | Michigan |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $980,623 | 18,235,346 |
kWh
|
$0.054 |
| Natural Gas | $1,105,108 | 401,844 |
MMBtu
|
$2.75 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $97,611 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $7,344 | $12,265 | n/a |
$7,344
135,991
kWh
|
- |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $29,150 | $57,583 | n/a |
$29,150
540,152
kWh
|
- |
| 03 | 2.3212: Optimize plant power factor | $48,220 | $67,860 | n/a |
$48,220
-
kWh
|
- |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $558 | $585 | n/a | - |
$558
-
MMBtu
|
| 05 | 2.2414: Use waste heat from hot flue gases to preheat | $4,452 | - | n/a | - |
$4,452
-
MMBtu
|
| 06 | 2.2511: Insulate bare equipment | $7,887 | $3,468 | n/a | - |
$7,887
-
MMBtu
|
| TOTAL RECOMMENDED | $97,611 | $141,761 |
$84,714
676,143
kWh
|
$12,897
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs