| Assessment Year | 1995 |
|---|---|
| Principal Product | Molded Rubber Parts |
| NAICS |
n/a
|
| SIC | 3069: Fabricated Rubber Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 250 |
| Plant Area |
56,000
ft2
|
| Annual Production | 78,000,000
pieces
|
| Production Hrs. Annual | 6,864
hrs
|
| Location (State) | Indiana |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $726,961 | 13,771,688 |
kWh
|
$0.053 |
| Natural Gas | $10,828 | 1,693 |
MMBtu
|
$6.40 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $31,144 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $14,701 | $28,760 |
$14,701
297,479
kWh
|
|
| 02 | 2.3212: Optimize plant power factor | $1,872 | $5,845 |
$1,872
-
kWh
|
|
| 03 | 2.3212: Optimize plant power factor | $6,854 | $19,804 |
$6,854
-
kWh
|
|
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,502 | $2,111 |
$4,502
85,287
kWh
|
|
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,713 | $40 |
$1,713
32,532
kWh
|
|
| 06 | 2.4231: Reduce the pressure of compressed air to the minimum required | $1,502 | $10 |
$1,502
28,429
kWh
|
|
| TOTAL RECOMMENDED | $31,144 | $56,570 |
$31,144
443,727
kWh
|
||
| TOTAL IMPLEMENTED | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs