| Assessment Year | 1994 |
|---|---|
| Principal Product | Plastic Film |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 17 |
| Plant Area |
25,000
ft2
|
| Annual Production | 9,000,000
lb
|
| Production Hrs. Annual | 8,670
hrs
|
| Location (State) | Florida |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $173,205 | 2,669,402 |
kWh
|
$0.065 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $39,159 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $7,145 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Primary Product Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,006 | $327 |
$2,006
30,481
kWh
|
- | |
| 02 | 2.7134: Use photocell controls | $1,094 | $2,400 |
$1,094
19,930
kWh
|
- | |
| 03 | 2.4133: Use most efficient type of electric motors | $3,879 | $5,038 |
$3,879
59,789
kWh
|
- | |
| 04 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,260 | $1,450 |
$1,260
19,343
kWh
|
- | |
| 05 | 4.631: Install an uninteruptable power supply | $30,000 | $100,000 | - | $30,000 | |
| 06 | 2.2511: Insulate bare equipment | $920 | $700 |
$920
16,706
kWh
|
- | |
| TOTAL RECOMMENDED | $39,159 | $109,915 |
$9,159
146,249
kWh
|
$30,000 | ||
| TOTAL IMPLEMENTED | $7,145 | $6,815 |
$7,145
109,613
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Primary Product Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs