| Assessment Year | 2000 |
|---|---|
| Principal Product | Custom injection molding |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 120 |
| Plant Area |
101,000
ft2
|
| Annual Production | 2,500,000
lb
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $155,792 | 4,834,701 |
kWh
|
$0.032 |
| Electricity Demand | $114,005 | 14,616 |
kW-mo/yr
|
$7.80 |
| LPG | $51,278 | 11,131 |
MMBtu
|
$4.61 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $34,420 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $12,340 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Other Liquid (non-haz) Savings | Personnel Changes Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 4.623: Employ modular jigs to reduce process set-up time | $22,080 | $4,000 | - | - | $6,720 | $15,360 | |
| 02 | 3.5112: Reprocess spent oils on site for re-use | $7,605 | $4,200 | - |
$7,605
-
gal
|
- | - | |
| 03 | 2.7124: Make a practice of turning off lights when not needed | $4,735 | - |
$4,735
177,022
kWh
|
- | - | - | |
| TOTAL RECOMMENDED | $34,420 | $8,200 |
$4,735
177,022
kWh
|
$7,605
-
gal
|
$6,720 | $15,360 | ||
| TOTAL IMPLEMENTED | $12,340 | $4,200 |
$4,735
177,022
kWh
|
$7,605
-
gal
|
- | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs