| Assessment Year | 1994 |
|---|---|
| Principal Product | plastic injection molding |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 54 |
| Plant Area |
40,000
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 7,500
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $164,883 | 3,143,611 |
kWh
|
$0.052 |
| Natural Gas | $11,439 | 1,981 |
MMBtu
|
$5.77 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $6,641 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $763 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2437: Recover waste heat from equipment | $513 | $100 |
$633
12,016
kWh
|
$(-120.0)
-
MMBtu
|
|
| 02 | 2.4133: Use most efficient type of electric motors | $250 | $300 |
$309
5,862
kWh
|
$(-59.0)
-
MMBtu
|
|
| 03 | 2.2437: Recover waste heat from equipment | $1,464 | $2,500 |
$361
8,499
kWh
|
$1,103
-
MMBtu
|
|
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,114 | $2,770 |
$4,375
92,321
kWh
|
$(-261.0)
-
MMBtu
|
|
| 05 | 2.7131: Add area lighting switches | $300 | $50 |
$374
7,620
kWh
|
$(-74.0)
-
MMBtu
|
|
| TOTAL RECOMMENDED | $6,641 | $5,720 |
$6,052
126,318
kWh
|
$589
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $763 | $400 |
$942
17,878
kWh
|
$(-179.0)
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs