| Assessment Year | 1991 |
|---|---|
| Principal Product | PLASTIC EXTRUSIONS |
| NAICS |
n/a
|
| SIC | 3083: Laminated Plastics Plate, Sheet, and Profile Shapes |
| Sales Range | $10 M to 50M |
| # of Employees | 96 |
| Plant Area |
n/a
|
| Annual Production | 15,000,000
lb
|
| Production Hrs. Annual | 8,500
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $270,910 | 6,913,834 |
kWh
|
$0.039 |
| Natural Gas | $15,090 | 3,697 |
MMBtu
|
$4.08 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $17,402 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $17,402 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $7,567 | - |
$7,567
-
kWh
|
- | |
| 02 | 2.6221: Use most efficient equipment at it's maximum capacity and less efficient equipment only when necessary | $4,627 | $4,000 |
$4,627
37,808
kWh
|
- | |
| 03 | 2.6222: Use drying oven (batch type) on alternate days or other optimum schedule to run equipment with full loads | $5,208 | - |
$4,748
122,509
kWh
|
$460 | |
| TOTAL RECOMMENDED | $17,402 | $4,000 |
$16,942
160,317
kWh
|
$460 | ||
| TOTAL IMPLEMENTED | $17,402 | $4,000 |
$16,942
160,317
kWh
|
$460 | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs