| Assessment Year | 1990 |
|---|---|
| Principal Product | CUSTOM INJECTION MOLDING |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 79 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $313,177 | 6,595,252 |
kWh
|
$0.047 |
| Natural Gas | $9,314 | 2,509 |
MMBtu
|
$3.71 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $45,310 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $45,310 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4322: Use or replace with energy efficient substitutes | $10,147 | - |
$12,584
308,030
kWh
|
$(-2,437.0)
-
MMBtu
|
|
| 02 | 2.3191: Use demand controller or load shedder | $1,320 | - |
$1,320
-
kWh
|
- | |
| 03 | 2.6242: Minimize operation of equipment maintained in standby condition | $13,053 | - |
$13,053
287,515
kWh
|
- | |
| 04 | 2.4322: Use or replace with energy efficient substitutes | $20,790 | - |
$20,790
405,627
kWh
|
- | |
| TOTAL RECOMMENDED | $45,310 | - |
$47,747
1,001,172
kWh
|
$(-2,437.0)
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $45,310 | - |
$47,747
1,001,172
kWh
|
$(-2,437.0)
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs