| Assessment Year | 1987 |
|---|---|
| Principal Product | CUSTOM PLASTIC MOLDING |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 183 |
| Plant Area |
n/a
|
| Annual Production | 50,000,000
pieces
|
| Production Hrs. Annual | 6,600
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $168,338 | 3,635,991 |
kWh
|
$0.046 |
| Natural Gas | $18,432 | 3,279 |
MMBtu
|
$5.62 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $3,041 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $3,041 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $743 | $1,200 |
$909
13,775
kWh
|
$(-166.0)
-
MMBtu
|
- | |
| 02 | 2.4239: Eliminate or reduce compressed air usage | $1,052 | $2,200 |
$1,220
46,307
kWh
|
$(-168.0)
-
MMBtu
|
- | |
| 03 | 2.7133: Use separate switches on perimeter lighting which may be turned off when natural light is available | $712 | $550 |
$682
22,860
kWh
|
- | $30 | |
| 04 | 2.2511: Insulate bare equipment | $534 | $3,054 |
$434
9,086
kWh
|
- | $100 | |
| TOTAL RECOMMENDED | $3,041 | $7,004 |
$3,245
92,028
kWh
|
$(-334.0)
-
MMBtu
|
$130 | ||
| TOTAL IMPLEMENTED | $3,041 | $7,004 |
$3,245
92,028
kWh
|
$(-334.0)
-
MMBtu
|
$130 | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs