| Assessment Year | 1985 |
|---|---|
| Principal Product | MOLDED PLASTIC PARTS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 47 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $63,541 | 1,058,324 |
kWh
|
$0.060 |
| Natural Gas | $835 | 142 |
MMBtu
|
$5.88 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $2,306 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,349 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.6222: Use drying oven (batch type) on alternate days or other optimum schedule to run equipment with full loads | $162 | - |
$162
5,569
kWh
|
- | - | |
| 02 | 2.2511: Insulate bare equipment | $1,349 | $315 |
$1,349
22,567
kWh
|
- | - | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $795 | $284 |
$797
15,826
kWh
|
$(-62.0)
-
MMBtu
|
$60 | |
| TOTAL RECOMMENDED | $2,306 | $599 |
$2,308
43,962
kWh
|
$(-62.0)
-
MMBtu
|
$60 | ||
| TOTAL IMPLEMENTED | $1,349 | $315 |
$1,349
22,567
kWh
|
- | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs