| Assessment Year | 1984 |
|---|---|
| Principal Product | PLASTIC MOLDED PRODUCTS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 109 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Ohio |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $96,094 | 1,686,108 |
kWh
|
$0.057 |
| Natural Gas | $98,753 | 17,588 |
MMBtu
|
$5.61 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $12,700 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $12,700 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2491: Use cooling air which cools hot work pieces for space heating | $5,049 | $2,250 | - |
$5,049
-
MMBtu
|
|
| 02 | 2.6212: Turn off equipment during breaks, reduce operating time | $521 | $600 |
$583
12,309
kWh
|
$(-62.0)
-
MMBtu
|
|
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,487 | $346 |
$1,902
35,170
kWh
|
$(-415.0)
-
MMBtu
|
|
| 04 | 2.1233: Analyze flue gas for proper air/fuel ratio | $5,055 | $700 | - |
$5,055
-
MMBtu
|
|
| 05 | 2.2122: Install / repair insulation on condensate lines | $588 | $680 | - |
$588
-
MMBtu
|
|
| TOTAL RECOMMENDED | $12,700 | $4,576 |
$2,485
47,479
kWh
|
$10,215
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $12,700 | $4,576 |
$2,485
47,479
kWh
|
$10,215
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs