| Assessment Year | 2010 |
|---|---|
| Principal Product | Fluorofibers |
| NAICS | 325220: Artificial and Synthetic Fibers and Filaments Manufacturing |
| SIC | 2824: Manmade Organic Fibers, Except Cellulosic |
| Sales Range | $10 M to 50M |
| # of Employees | 53 |
| Plant Area |
82,000
ft2
|
| Annual Production | 800,000
lb
|
| Production Hrs. Annual | 8,400
hrs
|
| Location (State) | Alabama |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $281,336 | 4,580,296 |
kWh
|
$0.061 |
| Electricity Fees | $170,939 | - |
|
- |
| Natural Gas | $25,023 | 2,267 |
MMBtu
|
$11.04 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $23,167 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $13,658 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7231: Use radiant heater for spot heating | $8,059 | $4,878 |
$8,059
730
kWh
|
- | |
| 02 | 2.7447: Install vinyl strip / high speed / air curtain doors | $486 | - |
$94
1,531
kWh
|
$392
-
MMBtu
|
|
| 03 | 2.6218: Turn off equipment when not in use | $6,421 | - |
$6,421
104,538
kWh
|
- | |
| 04 | 2.7135: Install occupancy sensors | $3,976 | $728 |
$3,976
64,740
kWh
|
- | |
| 05 | 2.7124: Make a practice of turning off lights when not needed | $1,545 | - |
$1,545
25,610
kWh
|
- | |
| 06 | 2.4231: Reduce the pressure of compressed air to the minimum required | $1,450 | - |
$1,450
23,580
kWh
|
- | |
| 07 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,230 | $2,000 |
$1,230
19,975
kWh
|
- | |
| TOTAL RECOMMENDED | $23,167 | $7,606 |
$22,775
240,704
kWh
|
$392
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $13,658 | $2,728 |
$13,266
216,394
kWh
|
$392
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs