| Assessment Year | 2015 |
|---|---|
| Principal Product | Plastic Injection Molding and Tooling |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 240 |
| Plant Area |
77,000
ft2
|
| Annual Production | 330,700,000
pieces
|
| Production Hrs. Annual | 7,488
hrs
|
| Location (State) | New York |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $462,866 | 6,270,326 |
kWh
|
$0.074 |
| Electricity Demand | $260,201 | 19,784 |
kW-mo/yr
|
$13.15 |
| Natural Gas | $3,402 | 392 |
MMBtu
|
$8.68 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $37,642 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $7,940 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Personnel Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $3,565 | $1,340 |
$3,565
48,308
kWh
|
- | - | |
| 02 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $4,375 | $2,025 |
$4,375
59,280
kWh
|
- | - | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $26,157 | $26,290 |
$20,253
274,435
kWh
|
$5,904
-
kW-mo/yr
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $333 | $340 |
$123
1,664
kWh
|
$30
-
kW-mo/yr
|
$180 | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,212 | $8,485 |
$2,005
27,156
kWh
|
$978
-
kW-mo/yr
|
$229 | |
| TOTAL RECOMMENDED | $37,642 | $38,480 |
$30,321
410,843
kWh
|
$6,912
-
kW-mo/yr
|
$409 | ||
| TOTAL IMPLEMENTED | $7,940 | $3,365 |
$7,940
107,588
kWh
|
- | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs