Assessment Year | 2004 |
---|---|
Principal Product | Printed Tags and Labels |
NAICS | 323111: Commercial Printing (except Screen and Books) |
SIC | 2759: Commercial Printing, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 154 |
Plant Area |
67,500
ft2
|
Annual Production | 703,000,000
pieces
|
Production Hrs. Annual | 6,240
hrs
|
Location (State) | Pennsylvania |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $80,887 | 1,719,900 |
kWh
|
$0.047 |
Electricity Demand | $24,098 | 4,430 |
kW-mo/yr
|
$5.44 |
Natural Gas | $16,308 | 3,031 |
MMBtu
|
$5.38 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $338,665 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $335,310 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | One-time Revenue or Avoided Cost Savings |
---|---|---|---|---|---|---|---|
01 | 4.431: Train operators for maximum operating efficiency | $65,154 | $9,000 | - | - | $65,154 | |
02 | 2.7135: Install occupancy sensors | $3,355 | $1,049 |
$3,355
67,092
kWh
|
- | - | |
03 | 2.4221: Install compressor air intakes in coolest locations | $1,106 | $491 |
$780
15,604
kWh
|
$326
-
kW-mo/yr
|
- | |
04 | 4.132: Purchase new equipment to reduce material use / cost | $217,181 | $187,500 | - | - | $217,181 | |
05 | 3.6193: Install equipment (eg compactor) to reduce disposal costs | $51,637 | $45,000 | - | - | $51,637 | |
06 | 2.7111: Reduce illumination to minimum necessary levels | $232 | $250 |
$150
2,995
kWh
|
$82
-
kW-mo/yr
|
- | |
TOTAL RECOMMENDED | $338,665 | $243,290 |
$4,285
85,691
kWh
|
$408
-
kW-mo/yr
|
$333,972 | ||
TOTAL IMPLEMENTED | $335,310 | $242,241 |
$930
18,599
kWh
|
$408
-
kW-mo/yr
|
$333,972 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | One-time Revenue or Avoided Cost Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs