Assessment Year | 1997 |
---|---|
Principal Product | Cooked & Dried Meat Products |
NAICS |
n/a
|
SIC | 2013: Sausages and Other Prepared Meat Products |
Sales Range | $10 M to 50M |
# of Employees | 120 |
Plant Area |
85,000
ft2
|
Annual Production | 6,000,000
lb
|
Production Hrs. Annual | 5,005
hrs
|
Location (State) | California |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $239,738 | 4,111,665 |
kWh
|
$0.058 |
Electricity Demand | $103,727 | 7,947 |
kW-mo/yr
|
$13.05 |
Natural Gas | $96,913 | 18,725 |
MMBtu
|
$5.18 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $147,532 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | - |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Water Disposal Savings | Solid Waste (non-haz) Savings | Personnel Changes Savings |
---|---|---|---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $19,567 | $25,020 |
$14,336
245,897
kWh
|
$5,231
-
kW-mo/yr
|
- | - | - | - | |
02 | 2.7133: Use separate switches on perimeter lighting which may be turned off when natural light is available | $8,269 | $19,750 |
$6,921
118,699
kWh
|
$1,348
-
kW-mo/yr
|
- | - | - | - | |
03 | 2.4133: Use most efficient type of electric motors | $1,606 | $1,680 |
$1,184
20,223
kWh
|
$422
-
kW-mo/yr
|
- | - | - | - | |
04 | 2.3212: Optimize plant power factor | $1,784 | $3,010 | - | - | $1,784 | - | - | - | |
05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,656 | $204 |
$1,237
21,102
kWh
|
$419
-
kW-mo/yr
|
- | - | - | - | |
06 | 2.4231: Reduce the pressure of compressed air to the minimum required | $790 | - |
$518
8,792
kWh
|
$272
-
kW-mo/yr
|
- | - | - | - | |
07 | 2.4239: Eliminate or reduce compressed air usage | $2,226 | $175 |
$1,205
20,809
kWh
|
$1,021
-
kW-mo/yr
|
- | - | - | - | |
08 | 3.4111: Use closed cycle process to minimize waste water production | $7,233 | $2,490 |
$(-1,489.0)
(-25,498)
kWh
|
- | - |
$8,722
-
Tgal
|
- | - | |
09 | 3.4156: Use flow control valves on equipment to optimize water use | $4,893 | - | - | - | - |
$4,893
-
Tgal
|
- | - | |
10 | 3.5315: Lease / purchase baler; sell cardboard to recycler | $24,394 | $250 | - | - | - | - |
$24,394
-
lb
|
- | |
11 | 4.441: Install automatic packing equipment | $21,040 | $11,500 | - | - | - | - | - | $21,040 | |
12 | 4.422: Utilize outside contracting | $54,074 | $250 | - | - | - | - | - | $54,074 | |
TOTAL RECOMMENDED | $147,532 | $64,329 |
$23,912
410,024
kWh
|
$8,713
-
kW-mo/yr
|
$1,784 |
$13,615
-
Tgal
|
$24,394
-
lb
|
$75,114 | ||
TOTAL IMPLEMENTED | - | - | - | - | - | - | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Water Disposal Savings | Solid Waste (non-haz) Savings | Personnel Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs