| Assessment Year | 1994 |
|---|---|
| Principal Product | Custom Rubber Products |
| NAICS |
n/a
|
| SIC | 3061: Molded, Extruded, and Lathe-Cut Mechanical Rubber Goods |
| Sales Range | $10 M to 50M |
| # of Employees | 141 |
| Plant Area |
51,000
ft2
|
| Annual Production | 4,000
ton
|
| Production Hrs. Annual | 2,016
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $242,572 | 2,745,897 |
kWh
|
$0.088 |
| Natural Gas | $111,782 | 38,901 |
MMBtu
|
$2.87 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $33,164 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $30,064 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $2,213 | $3,566 |
$2,213
25,205
kWh
|
- | |
| 02 | 2.7135: Install occupancy sensors | $198 | $840 |
$198
2,345
kWh
|
- | |
| 03 | 2.3212: Optimize plant power factor | $1,533 | $2,948 |
$1,533
-
kWh
|
- | |
| 04 | 2.2136: Install / repair insulation on steam lines | $5,040 | $17,134 | - |
$5,040
-
MMBtu
|
|
| 05 | 2.2511: Insulate bare equipment | $20,575 | $46,287 | - |
$20,575
-
MMBtu
|
|
| 06 | 2.2511: Insulate bare equipment | $1,244 | $4,261 | - |
$1,244
-
MMBtu
|
|
| 07 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $323 | $1,176 |
$323
3,810
kWh
|
- | |
| 08 | 2.4322: Use or replace with energy efficient substitutes | $1,369 | $4,400 |
$1,369
15,533
kWh
|
- | |
| 09 | 2.4314: Use synthetic lubricant | $669 | - |
$669
16,706
kWh
|
- | |
| TOTAL RECOMMENDED | $33,164 | $80,612 |
$6,305
63,599
kWh
|
$26,859
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $30,064 | $72,424 |
$3,205
45,721
kWh
|
$26,859
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs