Assessment Year | 1994 |
---|---|
Principal Product | Semiconductor Etching Equipment |
NAICS |
n/a
|
SIC | 3559: Special Industry Machinery, Not Elsewhere Classified |
Sales Range | $10 M to 50M |
# of Employees | 170 |
Plant Area |
95,000
ft2
|
Annual Production | 50
pieces
|
Production Hrs. Annual | 2,250
hrs
|
Location (State) | California |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $473,191 | 5,167,351 |
kWh
|
$0.092 |
Natural Gas | $37,659 | 6,859 |
MMBtu
|
$5.49 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $127,082 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | - |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|
01 | 2.8114: Change rate schedules or other changes in utility service | $64,588 | $172,000 | n/a | - | $64,588 |
02 | 2.4133: Use most efficient type of electric motors | $15,358 | $15,212 | n/a |
$15,358
167,644
kWh
|
- |
03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,285 | $4,058 | n/a |
$2,285
24,912
kWh
|
- |
04 | 2.7131: Add area lighting switches | $26,202 | $2,990 | n/a |
$26,202
286,049
kWh
|
- |
05 | 2.7135: Install occupancy sensors | $3,582 | $1,470 | n/a |
$3,582
39,273
kWh
|
- |
06 | 2.3212: Optimize plant power factor | $3,945 | $7,558 | n/a |
$3,945
-
kWh
|
- |
07 | 2.6218: Turn off equipment when not in use | $5,641 | $3,560 | n/a |
$5,641
61,547
kWh
|
- |
08 | 2.7111: Reduce illumination to minimum necessary levels | $3,564 | $488 | n/a |
$3,564
38,980
kWh
|
- |
09 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $1,917 | $2,400 | n/a |
$1,917
20,809
kWh
|
- |
TOTAL RECOMMENDED | $127,082 | $209,736 |
$62,494
639,214
kWh
|
$64,588 | ||
TOTAL IMPLEMENTED | - | - | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs