| Assessment Year | 2019 |
|---|---|
| Principal Product | Plastic Products |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 110 |
| Plant Area |
45,000
ft2
|
| Annual Production | 1
units
|
| Production Hrs. Annual | 6,120
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $106,102 | 1,409,479 |
kWh
|
$0.075 |
| Electricity Demand | $168,404 | 4,869 |
kW-mo/yr
|
$34.59 |
| Electricity Fees | $8,947 | - |
|
- |
| TOTAL YEARLY COSTS | $283,453 | |||
| RECOMMENDED SAVINGS* | $7,586 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $4,175 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $2,249 | $11,435 |
$855
11,368
kWh
|
$1,394
-
kW-mo/yr
|
|
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,045 | $300 |
$848
11,260
kWh
|
$197
-
kW-mo/yr
|
|
| 03 | 2.4133: Use most efficient type of electric motors | $2,463 | $13,165 |
$812
10,777
kWh
|
$1,651
-
kW-mo/yr
|
|
| 04 | 2.4324: Replace hydraulic / pneumatic equipment with electric equipment | $810 | $1,204 |
$810
10,753
kWh
|
- | |
| 05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $667 | - |
$667
8,864
kWh
|
- | |
| 06 | 2.4231: Reduce the pressure of compressed air to the minimum required | $352 | - |
$352
4,675
kWh
|
- | |
| TOTAL RECOMMENDED | $7,586 | $26,104 |
$4,344
57,697
kWh
|
$3,242
-
kW-mo/yr
|
||
| TOTAL IMPLEMENTED | $4,175 | $13,465 |
$2,327
30,901
kWh
|
$1,848
-
kW-mo/yr
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs