Assessment Year | 2015 |
---|---|
Principal Product | Aircraft components |
NAICS | 332112: Nonferrous Forging |
SIC | 3463: Nonferrous Forgings |
Sales Range | $10 M to 50M |
# of Employees | 45 |
Plant Area |
80,000
ft2
|
Annual Production | 100
pieces
|
Production Hrs. Annual | 5,860
hrs
|
Location (State) | California |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $134,244 | 1,562,182 |
kWh
|
$0.086 |
Electricity Demand | $121,635 | 6,202 |
kW-mo/yr
|
$19.61 |
Electricity Fees | $8,865 | - |
|
- |
Natural Gas | $228,948 | 186,750 |
MMBtu
|
$1.23 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $29,395 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | - |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Natural Gas Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.2414: Use waste heat from hot flue gases to preheat | $12,106 | $21,000 | - | - | - |
$12,106
-
MMBtu
|
|
02 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $9,418 | $1,750 | - | - | $9,418 | - | |
03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,658 | $2,000 |
$1,373
15,979
kWh
|
$1,285
-
kW-mo/yr
|
- | - | |
04 | 2.4133: Use most efficient type of electric motors | $2,296 | $6,475 |
$1,118
13,012
kWh
|
$1,178
-
kW-mo/yr
|
- | - | |
05 | 2.7135: Install occupancy sensors | $2,105 | $1,508 |
$2,105
24,500
kWh
|
- | - | - | |
06 | 2.2511: Insulate bare equipment | $812 | $2,323 | - | - | - |
$812
-
MMBtu
|
|
TOTAL RECOMMENDED | $29,395 | $35,056 |
$4,596
53,491
kWh
|
$2,463
-
kW-mo/yr
|
$9,418 |
$12,918
-
MMBtu
|
||
TOTAL IMPLEMENTED | - | - | - | - | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs