| Assessment Year | 2012 |
|---|---|
| Principal Product | O-Rings and Seals |
| NAICS | 326299: All Other Rubber Product Manufacturing |
| SIC | 3053: Gaskets, Packing, and Sealing Devices |
| Sales Range | $10 M to 50M |
| # of Employees | 188 |
| Plant Area |
40,000
ft2
|
| Annual Production | 80,000,000
pieces
|
| Production Hrs. Annual | 6,600
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $356,398 | 4,341,896 |
kWh
|
$0.082 |
| Electricity Demand | $202,909 | 9,780 |
kW-mo/yr
|
$20.75 |
| Electricity Fees | $(-58,379.0) | - |
|
- |
| Natural Gas | $1,607 | 136 |
MMBtu
|
$11.82 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $63,558 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.1121: Use insulation in furnaces to facilitate heating / cooling | $1,132 | $320 |
$1,132
13,795
kWh
|
- | - | |
| 02 | 2.7145: Install skylights | $14,679 | $13,457 |
$14,679
178,794
kWh
|
- | - | |
| 03 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $34,656 | $38,885 |
$17,177
209,220
kWh
|
$27,390
-
kW-mo/yr
|
$(-9,911.0)
-
MMBtu
|
|
| 04 | 2.7135: Install occupancy sensors | $472 | $640 |
$472
5,766
kWh
|
- | - | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $8,491 | $12,231 |
$5,109
62,235
kWh
|
$3,382
-
kW-mo/yr
|
- | |
| 06 | 2.7145: Install skylights | $4,128 | $7,660 |
$2,829
34,460
kWh
|
$1,299
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $63,558 | $73,193 |
$41,398
504,270
kWh
|
$32,071
-
kW-mo/yr
|
$(-9,911.0)
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs