| Assessment Year | 1996 |
|---|---|
| Principal Product | Plastic Injection Molded Products |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 120 |
| Plant Area |
93,500
ft2
|
| Annual Production | 4,500,000
lb
|
| Production Hrs. Annual | 12,250
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $231,291 | 4,222,157 |
kWh
|
$0.055 |
| Electricity Demand | $176,775 | 10,433 |
kW-mo/yr
|
$16.94 |
| Natural Gas | $1,869 | 150 |
MMBtu
|
$12.46 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $27,231 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Personnel Changes Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $4,297 | $567 |
$4,297
49,531
kWh
|
- | - | |
| 02 | 2.2511: Insulate bare equipment | $3,610 | $928 |
$3,610
67,995
kWh
|
- | - | |
| 03 | 2.4133: Use most efficient type of electric motors | $2,399 | $3,900 |
$2,399
39,859
kWh
|
- | - | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,067 | $5,868 |
$6,067
56,565
kWh
|
- | - | |
| 05 | 2.7144: Install spectral reflectors / delamp | $3,845 | $4,165 |
$3,845
32,239
kWh
|
- | - | |
| 06 | 2.7135: Install occupancy sensors | $989 | $730 |
$989
7,034
kWh
|
- | - | |
| 07 | 3.6193: Install equipment (eg compactor) to reduce disposal costs | $5,660 | $11,000 | - | - | $5,660 | |
| 08 | 3.7134: Wash and reuse rags on-site | $364 | $600 | - | $364 | - | |
| TOTAL RECOMMENDED | $27,231 | $27,758 |
$21,207
253,223
kWh
|
$364 | $5,660 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Personnel Changes Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs