| Assessment Year | 1995 |
|---|---|
| Principal Product | Dry Wall Finishing Products |
| NAICS |
n/a
|
| SIC | 3275: Gypsum Products |
| Sales Range | $50 M to 100M |
| # of Employees | 150 |
| Plant Area |
116,600
ft2
|
| Annual Production | 11,000,000
pieces
|
| Production Hrs. Annual | 7,904
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $293,173 | 3,267,292 |
kWh
|
$0.090 |
| Natural Gas | $1,082 | 117 |
MMBtu
|
$9.25 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $14,113 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $12,250 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Water Consumption Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $5,917 | $4,630 |
$5,917
65,944
kWh
|
- | |
| 02 | 3.4115: Recover and reuse cooling water | $306 | $500 |
$(-9.0)
(-293)
kWh
|
$315
-
Tgal
|
|
| 03 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $611 | $500 |
$611
-
kWh
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,078 | $5,522 |
$2,078
24,033
kWh
|
- | |
| 05 | 2.7144: Install spectral reflectors / delamp | $1,970 | $2,510 |
$1,970
20,223
kWh
|
- | |
| 06 | 2.7135: Install occupancy sensors | $1,557 | $1,576 |
$1,557
15,826
kWh
|
- | |
| 07 | 2.7134: Use photocell controls | $1,674 | $106 |
$1,674
16,413
kWh
|
- | |
| TOTAL RECOMMENDED | $14,113 | $15,344 |
$13,798
142,146
kWh
|
$315
-
Tgal
|
||
| TOTAL IMPLEMENTED | $12,250 | $13,268 |
$12,250
126,613
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Water Consumption Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs