| Assessment Year | 1994 |
|---|---|
| Principal Product | Plastic Injection Molded Parts |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $50 M to 100M |
| # of Employees | 350 |
| Plant Area |
n/a
|
| Annual Production | 2,000,000
lb
|
| Production Hrs. Annual | 8,760
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $565,187 | 7,966,296 |
kWh
|
$0.071 |
| Natural Gas | $52,296 | 9,250 |
MMBtu
|
$5.65 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $164,981 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $43,813 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $29,182 | $22,260 |
$29,182
411,196
kWh
|
|
| 02 | 2.2614: Use cooling tower or economizer to replace chiller cooling | $18,252 | $73,354 |
$18,252
257,327
kWh
|
|
| 03 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $5,565 | - |
$5,565
-
kWh
|
|
| 04 | 2.2614: Use cooling tower or economizer to replace chiller cooling | $90,168 | $27,490 |
$90,168
1,270,516
kWh
|
|
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $14,631 | $11,471 |
$14,631
197,245
kWh
|
|
| 06 | 2.7144: Install spectral reflectors / delamp | $6,477 | $5,450 |
$6,477
79,426
kWh
|
|
| 07 | 2.7135: Install occupancy sensors | $706 | $616 |
$706
8,792
kWh
|
|
| TOTAL RECOMMENDED | $164,981 | $140,641 |
$164,981
2,224,502
kWh
|
||
| TOTAL IMPLEMENTED | $43,813 | $33,731 |
$43,813
608,441
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs