| Assessment Year | 1994 |
|---|---|
| Principal Product | Gyroscope |
| NAICS |
n/a
|
| SIC | 3679: Electronic Components, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 214 |
| Plant Area |
25,000
ft2
|
| Annual Production | 1,100
pieces
|
| Production Hrs. Annual | 4,330
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $93,166 | 932,298 |
kWh
|
$0.100 |
| Natural Gas | $11,232 | 1,553 |
MMBtu
|
$7.23 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $17,957 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $5,696 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $1,578 | $3,900 |
$1,578
15,826
kWh
|
- | |
| 02 | 2.4323: Use optimum size and capacity equipment | $12,261 | $82,000 |
$12,261
122,802
kWh
|
- | |
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $474 | $1,400 |
$474
4,689
kWh
|
- | |
| 04 | 2.2511: Insulate bare equipment | $582 | $750 | - |
$582
-
MMBtu
|
|
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $157 | $720 |
$157
1,465
kWh
|
- | |
| 06 | 2.7144: Install spectral reflectors / delamp | $245 | $500 |
$245
2,345
kWh
|
- | |
| 07 | 2.7135: Install occupancy sensors | $1,484 | $2,520 |
$1,484
13,775
kWh
|
- | |
| 08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $793 | $114 |
$793
5,275
kWh
|
- | |
| 09 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $383 | $280 |
$383
3,224
kWh
|
- | |
| TOTAL RECOMMENDED | $17,957 | $92,184 |
$17,375
169,401
kWh
|
$582
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $5,696 | $10,184 |
$5,114
46,599
kWh
|
$582
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs