| Assessment Year | 1999 |
|---|---|
| Principal Product | Processed Fish |
| NAICS |
n/a
|
| SIC | 2092: Prepared Fresh or Frozen Fish and Seafoods |
| Sales Range | $10 M to 50M |
| # of Employees | 175 |
| Plant Area |
50,000
ft2
|
| Annual Production | 15,148,484
lb
|
| Production Hrs. Annual | 5,160
hrs
|
| Location (State) | Alaska |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $613,805 | 4,640,973 |
kWh
|
$0.13 |
| Electricity Fees | $61,520 | - |
|
- |
| LPG | $44,407 | 1,443 |
MMBtu
|
$30.77 |
| Fuel Oil #2 | $74,987 | 12,438 |
MMBtu
|
$6.03 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $1,406,270 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $414,706 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #2 Savings | Water Disposal Savings | Personnel Changes Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $23,531 | $41,296 |
$23,531
161,782
kWh
|
- | - | - | - | |
| 02 | 2.3415: Use a fossil fuel engine to cogenerate electricity or motive power; and utilize heat | $403,875 | $572,000 |
$675,325
4,640,973
kWh
|
$(-271,450.0)
-
MMBtu
|
- | - | - | |
| 03 | 2.2621: Modify refrigeration system to operate at a lower pressure | $55,755 | - |
$55,755
383,060
kWh
|
- | - | - | - | |
| 04 | 2.2622: Replace existing chiller with high efficiency model | $18,500 | $40,000 |
$18,500
127,198
kWh
|
- | - | - | - | |
| 05 | 2.1233: Analyze flue gas for proper air/fuel ratio | $6,920 | $700 | - |
$6,920
-
MMBtu
|
- | - | - | |
| 06 | 4.423: Move product using mechanical means | $97,200 | $11,600 | - | - | - | $97,200 | - | |
| 07 | 4.441: Install automatic packing equipment | $350,000 | $570,000 | - | - | - | $350,000 | - | |
| 08 | 4.441: Install automatic packing equipment | $139,000 | $280,000 | - | - | - | $139,000 | - | |
| 09 | 4.652: Replace existing equipment with more suitable substitutes | $310,000 | $69,000 | - | - | - | - | $310,000 | |
| 10 | 3.4156: Use flow control valves on equipment to optimize water use | - | $490 | - | - | - | - | - | |
| 11 | 3.4111: Use closed cycle process to minimize waste water production | $1,489 | $6,220 |
$(-101.0)
(-586)
kWh
|
- |
$1,590
-
Tgal
|
- | - | |
| TOTAL RECOMMENDED | $1,406,270 | $1,591,306 |
$773,010
5,312,427
kWh
|
$(-264,530.0)
-
MMBtu
|
$1,590
-
Tgal
|
$586,200 | $310,000 | ||
| TOTAL IMPLEMENTED | $414,706 | $151,486 |
$97,786
672,040
kWh
|
$6,920
-
MMBtu
|
- | - | $310,000 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #2 Savings | Water Disposal Savings | Personnel Changes Savings | Primary Product Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs