Assessment Year | 2016 |
---|---|
Principal Product | Particle Board |
NAICS | 321219: Reconstituted Wood Product Manufacturing |
SIC | 2493: Reconstituted Wood Products |
Sales Range | $100 M to 500M |
# of Employees | 200 |
Plant Area |
827,640
ft2
|
Annual Production | 5,000,000
units
|
Production Hrs. Annual | 8,736
hrs
|
Location (State) | Oregon |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $4,634,111 | 70,044,000 |
kWh
|
$0.066 |
Natural Gas | $1,308,716 | 426,292 |
MMBtu
|
$3.07 |
TOTAL YEARLY COSTS | $5,942,827 | |||
RECOMMENDED SAVINGS* | $202,798 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $143,883 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Ancillary Material Cost Savings | One-time Revenue or Avoided Cost Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.6218: Turn off equipment when not in use | $74,285 | $6,200 |
$74,285
1,122,803
kWh
|
- | - | - | |
02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $20,472 | - |
$20,472
309,426
kWh
|
- | - | - | |
03 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $10,003 | $10,369 |
$10,003
151,191
kWh
|
- | - | - | |
04 | 2.2414: Use waste heat from hot flue gases to preheat | $31,513 | $47,575 | - |
$31,513
-
MMBtu
|
- | - | |
05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $17,613 | $47,385 |
$18,394
278,023
kWh
|
- | $(-1,087.0) | $306 | |
06 | 2.1224: Replace boiler | $48,912 | $250,000 | - |
$48,912
-
MMBtu
|
- | - | |
TOTAL RECOMMENDED | $202,798 | $361,529 |
$123,154
1,861,443
kWh
|
$80,425
-
MMBtu
|
$(-1,087.0) | $306 | ||
TOTAL IMPLEMENTED | $143,883 | $101,160 |
$113,151
1,710,252
kWh
|
$31,513
-
MMBtu
|
$(-1,087.0) | $306 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Ancillary Material Cost Savings | One-time Revenue or Avoided Cost Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs