| Assessment Year | 2008 |
|---|---|
| Principal Product | Particle Board |
| NAICS | 321219: Reconstituted Wood Product Manufacturing |
| SIC | 2493: Reconstituted Wood Products |
| Sales Range | $100 M to 500M |
| # of Employees | 320 |
| Plant Area |
325,930
ft2
|
| Annual Production | 177,650,000
pieces
|
| Production Hrs. Annual | 2,920
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $2,587,800 | 57,378,000 |
kWh
|
$0.045 |
| Natural Gas | $3,362,351 | 3,261,252 |
MMBtu
|
$1.03 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $238,140 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $75,500 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4112: Install soft-start to eliminate nuisance trips | $84,400 | $21,000 |
$84,400
2,286,864
kWh
|
- | - | |
| 02 | 2.123: Maintenance | $70,600 | $500 | - | - |
$70,600
-
MMBtu
|
|
| 03 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $31,500 | $24,110 |
$31,500
761,000
kWh
|
- | - | |
| 04 | 2.2127: Flash condensate to produce lower pressure steam | $13,800 | $11,475 | - | - |
$13,800
-
MMBtu
|
|
| 05 | 2.6218: Turn off equipment when not in use | $5,580 | $4,200 |
$5,580
151,400
kWh
|
- | - | |
| 06 | 2.612: General | $4,900 | $500 |
$4,900
132,678
kWh
|
- | - | |
| 07 | 2.3212: Optimize plant power factor | $27,360 | $114,000 | - |
$27,360
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $238,140 | $175,785 |
$126,380
3,331,942
kWh
|
$27,360
-
kW-mo/yr
|
$84,400
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $75,500 | $1,000 |
$4,900
132,678
kWh
|
- |
$70,600
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs