| Assessment Year | 2004 |
|---|---|
| Principal Product | Molded Plastic Products |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 140 |
| Plant Area |
40,000
ft2
|
| Annual Production | 1,200,000
pieces
|
| Production Hrs. Annual | 8,568
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $151,383 | 3,013,800 |
kWh
|
$0.050 |
| Electricity Demand | $34,290 | 80,484 |
kW-mo/yr
|
$0.43 |
| Electricity Fees | $1,398 | - |
|
- |
| Natural Gas | $8,042 | 944 |
MMBtu
|
$8.52 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $67,720 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $30,220 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Personnel Changes Savings | Primary Product Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 2.4231: Reduce the pressure of compressed air to the minimum required | $1,300 | $1,500 |
$1,100
21,500
kWh
|
$200
-
kW-mo/yr
|
- | - | |
| 02 | 2.4133: Use most efficient type of electric motors | $5,070 | $1,830 |
$4,320
82,800
kWh
|
$750
-
kW-mo/yr
|
- | - | |
| 03 | 4.431: Train operators for maximum operating efficiency | $16,000 | - | - | - | - | $16,000 | |
| 04 | 4.445: Install equipment to move product | $37,500 | $14,200 | - | - | $37,500 | - | |
| 05 | 4.423: Move product using mechanical means | $7,850 | $2,320 | - | - | $7,850 | - | |
| TOTAL RECOMMENDED | $67,720 | $19,850 |
$5,420
104,300
kWh
|
$950
-
kW-mo/yr
|
$45,350 | $16,000 | ||
| TOTAL IMPLEMENTED | $30,220 | $5,650 |
$5,420
104,300
kWh
|
$950
-
kW-mo/yr
|
$7,850 | $16,000 | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs