| Assessment Year | 2004 |
|---|---|
| Principal Product | Ultra Pure Chemicals |
| NAICS | 325180: Other Basic Inorganic Chemical Manufacturing |
| SIC | 2819: Industrial Inorganic Chemicals, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 70 |
| Plant Area |
37,200
ft2
|
| Annual Production | 12,000,000
lb
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $186,423 | 3,624,800 |
kWh
|
$0.051 |
| Electricity Demand | $36,904 | 82,440 |
kW-mo/yr
|
$0.45 |
| Electricity Fees | $11,936 | - |
|
- |
| Natural Gas | $96,605 | 14,852 |
MMBtu
|
$6.50 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $66,410 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $58,230 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Gaseous Waste Savings |
|---|---|---|---|---|---|---|---|
| 01 | 3.5311: Recover and reuse waste material | $45,100 | $16,200 | - | - |
$45,100
-
lb
|
|
| 02 | 2.6212: Turn off equipment during breaks, reduce operating time | $9,570 | - | - |
$9,570
-
MMBtu
|
- | |
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $6,670 | $6,670 |
$6,670
109,000
kWh
|
- | - | |
| 04 | 2.7135: Install occupancy sensors | $2,140 | $1,750 |
$2,140
39,600
kWh
|
- | - | |
| 05 | 2.1231: Establish burner maintenance schedule for boilers | $1,420 | $150 | - |
$1,420
-
MMBtu
|
- | |
| 06 | 2.2136: Install / repair insulation on steam lines | $1,510 | $790 | - |
$1,510
-
MMBtu
|
- | |
| TOTAL RECOMMENDED | $66,410 | $25,560 |
$8,810
148,600
kWh
|
$12,500
-
MMBtu
|
$45,100
-
lb
|
||
| TOTAL IMPLEMENTED | $58,230 | $18,100 |
$2,140
39,600
kWh
|
$10,990
-
MMBtu
|
$45,100
-
lb
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Gaseous Waste Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs