| Assessment Year | 1993 |
|---|---|
| Principal Product | Dimensional Lumber |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 117 |
| Plant Area |
n/a
|
| Annual Production | 101,000
thousand feet
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | Washington |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $400,306 | 10,441,970 |
kWh
|
$0.038 |
| Wood | $186,380 | 111,828 |
MMBtu
|
$1.67 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $45,340 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $39,340 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Other Energy Savings |
|---|---|---|---|---|---|---|
| 01 | 2.1232: Keep boiler tubes clean | $26,620 | $4,000 | - |
$26,620
-
MMBtu
|
|
| 02 | 2.2414: Use waste heat from hot flue gases to preheat | $6,000 | $1,700 | - |
$6,000
-
MMBtu
|
|
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,496 | $3,000 |
$2,496
67,702
kWh
|
- | |
| 04 | 2.4133: Use most efficient type of electric motors | $1,115 | $2,857 |
$1,115
29,308
kWh
|
- | |
| 05 | 2.3212: Optimize plant power factor | $2,478 | $7,050 |
$2,478
-
kWh
|
- | |
| 06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $6,631 | $30,340 |
$6,631
202,227
kWh
|
- | |
| TOTAL RECOMMENDED | $45,340 | $48,947 |
$12,720
299,237
kWh
|
$32,620
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $39,340 | $47,247 |
$12,720
299,237
kWh
|
$26,620
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Other Energy Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs