| Assessment Year | 1992 |
|---|---|
| Principal Product | CUSTOM MOLDED PLASTICS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 21 |
| Plant Area |
n/a
|
| Annual Production | 214,000
lb
|
| Production Hrs. Annual | 4,080
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $53,489 | 620,457 |
kWh
|
$0.086 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $9,279 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $6,993 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.6212: Turn off equipment during breaks, reduce operating time | $942 | - |
$942
19,050
kWh
|
|
| 02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $86 | - |
$86
879
kWh
|
|
| 03 | 3.4151: Minimize water usage | $1,770 | $574 |
$1,770
28,429
kWh
|
|
| 04 | 2.3191: Use demand controller or load shedder | $4,487 | $2,700 |
$4,487
-
kWh
|
|
| 05 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $934 | $1,000 |
$934
14,947
kWh
|
|
| 06 | 2.2511: Insulate bare equipment | $516 | $1,090 |
$516
6,155
kWh
|
|
| 07 | 2.4133: Use most efficient type of electric motors | $544 | $228 |
$544
6,448
kWh
|
|
| TOTAL RECOMMENDED | $9,279 | $5,592 |
$9,279
75,908
kWh
|
||
| TOTAL IMPLEMENTED | $6,993 | $3,928 |
$6,993
41,324
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs