| Assessment Year | 1989 |
|---|---|
| Principal Product | LUMBER |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $5 M to 10M |
| # of Employees | 35 |
| Plant Area |
n/a
|
| Annual Production | 30,000
thousand feet
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $146,732 | 2,780,774 |
kWh
|
$0.053 |
| Wood | $10,558 | 11,377 |
MMBtu
|
$0.93 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $35,389 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $35,389 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Wood Savings |
|---|---|---|---|---|---|---|
| 01 | 2.1233: Analyze flue gas for proper air/fuel ratio | $958 | $500 | - |
$958
-
MMBtu
|
|
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,246 | $900 |
$1,246
23,740
kWh
|
- | |
| 03 | 2.3212: Optimize plant power factor | $4,155 | $2,000 |
$4,155
-
kWh
|
- | |
| 04 | 2.4133: Use most efficient type of electric motors | $372 | $422 |
$372
7,034
kWh
|
- | |
| 05 | 2.2532: Use only amount of air necessary to prevent explosion hazard | $28,658 | $60,575 |
$28,658
690,504
kWh
|
- | |
| TOTAL RECOMMENDED | $35,389 | $64,397 |
$34,431
721,278
kWh
|
$958
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $35,389 | $64,397 |
$34,431
721,278
kWh
|
$958
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs