| Assessment Year | 1988 |
|---|---|
| Principal Product | DIMENSIONAL LUMBER |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 115 |
| Plant Area |
n/a
|
| Annual Production | 76,000
thousand feet
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $324,450 | 6,935,522 |
kWh
|
$0.047 |
| Wood | $222,254 | 520,715 |
MMBtu
|
$0.43 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $108,362 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $35,362 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Wood Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $13,384 | $5,000 |
$13,384
286,049
kWh
|
- | - | |
| 02 | 2.4133: Use most efficient type of electric motors | $498 | $630 |
$498
10,551
kWh
|
- | - | |
| 03 | 2.3413: Burn fossil fuel to produce steam to drive a steam turbine-generator and use steam exhaust for heat | $73,000 | $100,000 |
$353,000
6,935,522
kWh
|
$(-133,000.0)
-
MMBtu
|
$(-147,000.0) | |
| 04 | 2.3212: Optimize plant power factor | $6,379 | $13,650 |
$6,379
-
kWh
|
- | - | |
| 05 | 2.2532: Use only amount of air necessary to prevent explosion hazard | $15,101 | $32,576 |
$15,101
442,849
kWh
|
- | - | |
| TOTAL RECOMMENDED | $108,362 | $151,856 |
$388,362
7,674,971
kWh
|
$(-133,000.0)
-
MMBtu
|
$(-147,000.0) | ||
| TOTAL IMPLEMENTED | $35,362 | $51,856 |
$35,362
739,449
kWh
|
- | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs