Assessment Year | 1988 |
---|---|
Principal Product | LUMBER & VENEER |
NAICS |
n/a
|
SIC | 2421: Sawmills and Planing Mills, General |
Sales Range | $10 M to 50M |
# of Employees | 250 |
Plant Area |
n/a
|
Annual Production | 60,000
thousand feet
|
Production Hrs. Annual | 4,480
hrs
|
Location (State) | Oregon |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $491,317 | 16,732,122 |
kWh
|
$0.029 |
Wood | $228,920 | 387,998 |
MMBtu
|
$0.59 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $37,129 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $8,282 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Wood Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,235 | - |
$1,235
42,497
kWh
|
- | - | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $884 | $761 |
$1,137
39,273
kWh
|
- | $(-253.0) | |
03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,068 | $1,262 |
$1,442
49,824
kWh
|
- | $(-374.0) | |
04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,062 | $1,074 |
$733
25,205
kWh
|
- | $329 | |
05 | 2.4133: Use most efficient type of electric motors | $434 | $597 |
$434
14,947
kWh
|
- | - | |
06 | 2.8114: Change rate schedules or other changes in utility service | $20,000 | $55,000 |
$20,000
-
kWh
|
- | - | |
07 | 2.3414: Burn waste to produce steam to drive a steam turbine generator set and use steam exhaust for heat | $7,785 | $33,000 |
$11,325
428,195
kWh
|
$(-3,540.0)
-
MMBtu
|
- | |
08 | 2.4322: Use or replace with energy efficient substitutes | $4,661 | $10,500 |
$1,661
57,444
kWh
|
- | $3,000 | |
TOTAL RECOMMENDED | $37,129 | $102,194 |
$37,967
657,385
kWh
|
$(-3,540.0)
-
MMBtu
|
$2,702 | ||
TOTAL IMPLEMENTED | $8,282 | $13,120 |
$5,909
203,985
kWh
|
- | $2,373 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Wood Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs